Simple Structure Pneumatic Laser Chuck with Four Jaw for Laser Cutting Machine
1.Descripition
Our chuck is commonly made for laser fiber cutting machine. The whole chuck has a ability of using as an independent rotating spindle. In the meantime, the work-piece can be held tightly when rotating. Quick clamping and loosening actions can be made by side rotating air intake, and it can work with disconnecting air source.
The chuck outputs by using a cylinder directly, the mechanical efficiency is high, the energy loss is small, the output clamping force is large, and the clamping force is stable. Because the cylinder is used to clamp the work-piece directly, the working stroke of the cylinder is the working stroke of the chuck, and the clamping range is wide.
The center of the chuck is especially made in a square shape. It not only increases the size of square tube, but also increases the scope of actual use.
2.Performance Parameters
| | G600JF-230 |
| | 220mm |
| | 1.7KN |
| | 0.4-0.9MPa |
| | 500r/min |
| | 10-230mm |
| | 350mm |
| | 4.5g.m2 |
| | 141kg |
| | 219kg |
3.Dimensions
| Specifications | A | B | B1 | C | D | E | F | G | H | I | J | K | L | O | R | S |
| G600JF-230 | 520 | 350 | 680 | 690 | 191 | 120 | 460 | 194.5 | 330 | 376 | 402 | 29.5 | 230 | 20 | 12-M8 | 18 |
4.Advantages
| a. Full stroke design |
| b. Wide range of applications, diversification of processing profiles |
| c. High repetitive positioning accuracy |
| d. Low maintenance cost, long service life |
| e. Multiple configurations are available
e.1 Solid or hollow e.2 Comb-type or mortise-groove type claws |
5.Production Line
6.Our Service
1.We are the direct factory with good price and fast lead time.
2.Professional design team work with you.
3.Professional QC team to guarantee the high quality.
4.Providing OEM & ODM service.
